Growth history of fault-related folds and interaction with seabed channels in the toe-thrust region of the deep-water Niger delta

The deep-water fold and thrust belt of the southern Niger Delta has prominent thrusts and folds oriented perpendicular to the regional slope that formed as a result of the thin-skinned gravitational collapse of the delta above overpressured shale. The thrust-related folds have grown in the last 12.8 Ma and many of the thrusts are still actively growing and influencing the pathways of modern seabed channels. We use 3D seismic reflection data to constrain and analyse the spatial and temporal variation in shortening of four thrusts and folds having seabed relief in a study area of 2600 km2 size in 2200–3800 m water depth. Using these shortening measurements, we have quantified the variation in strain rates through time for both fault-propagation and detachment folds in the area, and we relate this to submarine channel response. The total amount of shortening on the individual structures investigated ranges from 1 to 4 km, giving a time-averaged maximum shortening rate of between 90 ± 10 and 350 ± 50 m/Myr (0.1 and 0.4 mm/yr). Fold shortening varies both spatially and temporally: The maximum interval shortening rate occurred between 9.5 Ma and 3.7 Ma, and has reduced significantly in the last 3.7 Ma. We suggest that the reduction in the Pliocene-Recent fold shortening rate is a response to the slow-down in extension observed in the up-dip extensional domain of the Niger Delta gravitational system in the same time interval. In the area dominated by the fault-propagation folds, the channels are able to cross the structures, but the detachment fold is a more significant barrier and has caused a channel to divert for 25 km parallel to the fold axis. The two sets of structures have positive bathymetric expressions, with an associated present day uphill slope of between 1.5° and 2°. However, the shorter uphill slopes of the fault-propagation folds and increased sediment blanketing allow channels to cross these structures. Channels that develop coevally with structural growth and that cross structures, do so in positions of recent strain minima and at interval strain rates that are generally less than −0.02 Ma−1 (−1 × 10−16 s−1). However, the broad detachment fold has caused channel diversion at an even lower strain rate of c. −0.002 Ma−1 (−7 × 10−17 s−1)

Influence of early postmortem protein oxidation on beef quality

The objective of this study was to examine the effect of early postmortem protein oxidation on the color and tenderness of beef steaks. To obtain a range of oxidation levels, the longissimus lumborum muscles (LM) from both strip loins of 20 steers fed either a finishing diet with vitamin E (1,000 IU per steer daily, minimum of 126 d [VITE]; n = 10 steers) or fed the same finishing diet without vitamin E (CON; n = 10 steers) were used. Within 24 h after slaughter, the LM muscle from each carcass was cut into 2.54-cm-thick steaks and individually vacuum packaged. Steaks from each steer were assigned to a nonirradiated group or an irradiated group. Steaks were irradiated within 26 h postmortem, and were aged at 4°C for 0, 1, 3, 7, and 14 d after irradiation. Steaks from each diet/irradiation/aging time treatment were used to determine color, shear force, and degree of protein oxidation (carbonyl content). Steaks from steers fed the VITE diet had higher (P \u3c 0.01) α-tocopherol contents than steaks from steers fed the CON diet. Immediately following irradiation, steaks that had been irradiated had lower (P \u3c 0.05) L* values regardless of diet. Irradiated steaks, regardless of diet, had lower a* (P \u3c 0.05) and b* (P \u3c 0.01) values than nonirradiated steaks at all aging times. Carbonyl concentration was higher (P \u3c 0.05) in proteins from irradiated steaks compared to nonirradiated steaks at 0, 1, 3, and 7 d postirradiation. Immunoblot analysis showed that vitamin E supplementation decreased the number and extent of oxidized sarcoplasmic proteins. Protein carbonyl content was positively correlated with Warner-Bratzler shear force values. These results indicate that increased oxidation of muscle proteins early postmortem could have negative effects on fresh meat color and tenderness

Characterisation of the transmissivity field of a fractured and karstic aquifer, Southern France

International audienceGeological and hydrological data collected at the Terrieu experimental site north of Montpellier, in a confined carbonate aquifer indicates that both fracture clusters and a major bedding plane form the main flow paths of this highly heterogeneous karst aquifer. However, characterising the geometry and spatial location of the main flow channels and estimating their flow properties remain difficult. These challenges can be addressed by solving an inverse problem using the available hydraulic head data recorded during a set of interference pumping tests.We first constructed a 2D equivalent porous medium model to represent the test site domain and then employed regular zoning parameterisation, on which the inverse modelling was performed. Because we aim to resolve the fine-scale characteristics of the transmissivity field, the problem undertaken is essentially a large-scale inverse model, i.e. the dimension of the unknown parameters is high. In order to deal with the high computational demands in such a large-scale inverse problem, a gradient-based, non-linear algorithm (SNOPT) was used to estimate the transmissivity field on the experimental site scale through the inversion of steady-state, hydraulic head measurements recorded at 22 boreholes during 8 sequential cross-hole pumping tests. We used the data from outcrops, borehole fracture measurements and interpretations of inter-well connectivities from interference test responses as initial models to trigger the inversion. Constraints for hydraulic conductivities, based on analytical interpretations of pumping tests, were also added to the inversion models. In addition, the efficiency of the adopted inverse algorithm enables us to increase dramatically the number of unknown parameters to investigate the influence of elementary discretisation on the reconstruction of the transmissivity fields in both synthetic and field studies.By following the above approach, transmissivity fields that produce similar hydrodynamic behaviours to the real head measurements were obtained. The inverted transmissivity fields show complex, spatial heterogeneities with highly conductive channels embedded in a low transmissivity matrix region. The spatial trend of the main flow channels is in a good agreement with that of the main fracture sets mapped on outcrops in the vicinity of the Terrieu site suggesting that the hydraulic anisotropy is consistent with the structural anisotropy. These results from the inverse modelling enable the main flow paths to be located and their hydrodynamic properties to be estimated

Influence of harvest processes on pork loin and ham quality

The purpose of this study was to determine the specific effects of extending the interval between dwell time and the duration of scalding on pork quality attributes. Sixty-four Duroc × Yorkshire pigs were randomly assigned to a 2 × 2 factorial treatment arrangement. Treatments included extending the dwell duration from 5 to 10 min and extending the scald duration from 5 to 8 min. All carcasses entered the cooler 50 min after exsanguination. At exsanguination, blood was collected for three 1-min intervals and then for a final 2-min period. Temperature and pH of the LM and semimembranosus muscle (SM) were measured at 45 min, and at 2, 4, 6, and 24 h postmortem (PM). Hunter L*, a*, and b* values were determined on the LM, SM, and biceps femoris (BF). Purge loss was measured on the SM, BF, and the sirloin end of the loin. Drip loss was measured in duplicate from LM chops after 1 and 5 d of storage. Warner-Bratzler shear force (WBS) measurements were determined on LM chops aged 1, 3, 5, and 7 d PM. Over 99% of the collected blood was obtained during the first 3 min after sticking. Carcasses scalded for 8 min had greater (P \u3c 0.05) semi-membranosus 2 h temperature (28.8°C) than carcasses scalded 5 min (27.3°C). An 8-min scald process resulted in longissimus dorsi chops with lower hue angle and greater WBS values than the 5-min scald process. Increasing dwell time from 5 to 10 min resulted in biceps femoris chops with greater hue angle and loin chops with greater WBS values at 3 d PM. Harvest processes did not significantly affect subjective quality scores, Hunter L* values, purge or drip loss. Lengthening the duration of dwell and scalding may result in a more rapid PM pH decline. Reducing the duration of scalding may lead to increased time for manual removal of hair. Because of differences in facilities, it is recommended that individual facilities monitor dwell and scald durations to determine how to best minimize time of entry into the cooler

Experimental Study of Aerodynamic Damping in Arrays of Vibrating Cantilevers

Cantilever structures vibrating in a fluid are encountered in numerous engineering applications. The aerodynamic loading from a fluid can have a large effect on both the resonance frequency and damping, and has been the subject of numerous studies. The aerodynamic loading on a single beam is altered when multiple beams are configured in an array. In such situations, neighboring beams interact through the fluid and their dynamic behavior is modified. In this work, aerodynamic interactions between neighboring cantilever beams operating near their first resonance mode and vibrating at amplitudes comparable to their widths are experimentally explored. The degree to which two beams become coupled through the fluid is found to be sensitive to vibration amplitude and proximity of neighboring components in the array. The cantilever beams considered are slender piezoelectric fans (approximately 6 cm in length), and are caused to vibrate in-phase and out-of-phase at frequencies near their fundamental resonance values. Aerodynamic damping is expressed in terms of the quality factor for two different array configurations and estimated for both in-phase and out-of-phase conditions. The two array configurations considered are for neighboring fans placed face-to-face and edge-to-edge. It is found that the damping is greatly influenced by proximity of neighboring fans and phase difference. For the face-to-face configuration, a reduction in damping is observed for in-phase vibration, while it is greatly increased for out-of-phase vibration; the opposite effect is seen for the edge-to-edge configuration. The resonance frequencies also show a dependence on the phase difference, but these changes are small compared to those observed for damping. Correlations are developed based on the experimental data which can be used to predict the aerodynamic damping in arrays of vibrating cantilevers. The distance at which the beams no longer interact is quantified for both array configurations. Understanding the fluid interactions between neighboring vibrating beams is essential for predicting the dynamic behavior of such arrays and designing them for practical applications

Supplemental Vitamin C Alleviates the Negative Effect of High Sulfur on Meat Quality

The data support the conclusion that vitamin C (VC) supplemented to feedlot cattle consuming high sulfur (S)diets may increase tenderness of the beef longissimus dorsi by protecting the protease µ-calpain. Additionally, VC supplementation improved the fatty acid profile of meat products by increasing omega 3 and omega 6 fatty acids(FA) and decreasing saturated fatty acids (SFA)